50v-1000v 3.0a gi500 thru gi510 web site: www.taychipst.com 1 of 2 features e-mail: sales@taychipst.com maximum ratings and electrical characteristics m e c h a n i c a l d a t a plastic package has underwriters laboratory flammability classification 94v-0 high surge current capability typical i r less than 0.1 m a construction utilizes void-free molded plastic technique high current operation of 3.0 amperes at t a =95c with no thermal runaway high temperature soldering guaranteed: 250c/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension case: jedec do-201ad molded plastic body terminals: plated axial leads, solderable per mil-std-750, method 2026 polarity: color band denotes cathode end mounting position: any weight: 0.04 ounce, 1.1 grams ratings at 25c ambient temperature unless otherwise specified. gi gi gi gi gi gi gi symbols 500 501 502 504 506 508 510 units maximum repetitive peak reverse voltage v rrm 50 100 200 400 600 800 1000 volts maximum rms voltage v rms 35 70 140 280 420 560 700 volts maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 volts maximum average forward rectified current 0.375" (9.5mm) lead length at t a = 95c i (av) 3.0 amps peak forward surge current 8.3ms single half sine-wave superimposed on i fsm 100.0 amps rated load (jedec method) maximum instantaneous forward voltage t j = 25c 1.1 at 9.4a t j =175c v f 1.0 volts maximum dc reverse current t a =25c 5.0 at rated dc blocking voltage t a =100c i r 50.0 m a typical junction capacitance (note 1) c j 28.0 pf typical reverse recovery time (note 2) t rr 2.0 m s typical thermal resistance (note 3) r q ja 20.0 r q jl 5.0 c/w operating junction temperature range t j -50 to +150 c storage temperature range t stg -50 to +175 c notes : (1) measured at 1.0 mhz and applied reverse voltage of 4.0 volts (2) reverse recovery test conditions: i f =0.5a, i r =1.0a, i rr =0.25a (3) thermal resistance from junction to ambient and from junction to lead at 0.375 (9.5mm) lead length, p.c.b. mounted with 0.8 x 0.8 (20 x 20mm) copper heatsinks general purpose plastic rectifier
ratings and characteristic curves gi500 thru gi510 e-mail: sales@taychipst.com web site: www.taychipst.com 2 of 2 50v-1000v 3.0a gi500 thru gi510 general purpose plastic rectifier 20 40 60 80 100 120 140 160 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 110100 10 100 200 0.4 0.6 0.8 1.0 1.6 1.8 0.01 0.1 10 100 1.2 1.4 1 0.1 1 10 100 1 10 100 0.01 0.1 1 10 100 0.1 1 10 100 fig. 1 - forward current derating curve temperature, c average forward rectified current, amperes t l = both leads to heat sink mounted lengths (l) as shown 60h z resistive or inductive load peak forward current, amperes number of cycles at 60 h z fig. 2 - maximum non-repetitive peak forward surge current t a =ambient temperature 0.375 (9.5mm) lead length p.c.b. mounting l = 0.31(7.9mm) l=0.25 (6.3mm) l= 0.50 (12.7mm) t j =150c 8.3ms single half sine-wave (jedec method) repetitive non-repetitive fig. 3 - typical instantaneous forward characteristics t j =25c pulse width=300 m s 1% duty cycle instantaneous forward current, amperes t j =25c f=1.0 mhz vsig=50mvp-p instantaneous forward voltage, volts fig. 6 - typical transient thermal impedance t, pulse duration, sec. transient thermal impedance, c/w fig. 5 - typical junction capacitance reverse voltage, volts junction capacitance, pf 0204060 0.01 0.1 10 100 80 100 1 percent of rated peak reverse voltage,% fig. 4 - typical reverse characteristics instantaneous reverse current, microamperes t j =100c t j =25c t j =150c
|